:  Jun 29, 2004



. Remove both A-pillar upper trim panels.

. Remove both B-pillar upper trim panels.

. Remove both C-pillar upper trim panels.

. Remove both D-pillar upper trim panels.

. Remove the front overhead console.
  Carefully release the 7 clips.
  Disconnect the 3 electrical connectors.




. Remove the rear overhead console.
  Carefully release the 9 clips.
  Disconnect the 2 electrical connectors.




. Disconnect the RH A-pillar electrical connector.



. Remove the sun visor.
  Remove the cover.
  Remove the 2 screws.
  Release from the clip.
  Disconnect the electrical connector.
  Repeat the above procedure for the other side.




. Remove the sun visor retaining clip.
  Release the screw cover.
  Remove the screw.
  Repeat the above procedure for the other side.




. Remove the passenger assist handle.
  Release the 2 screw covers.
  Remove the 2 screws.
  Repeat the above procedure for the remaining 5 handles.




. Position the front seats fully forward.

. Position the rear seats fully forward.

. Remove the rear headliner trim panel.
  Release the 7 clips.
  Disconnect the electrical connector.




. Disconnect the headliner wiring harness rear electrical connector.



. With assistance, carefully remove the headliner.
  Release the 14 clips.




. :
  Do not disassemble further if the component is removed for access only.

Remove the rear interior lamp.
  Release the clip.
  Disconnect the electrical connector.
  Repeat the above procedure for the other side.




. Remove the headliner wiring harness.



. Install the headliner wiring harness.
  Secure the wiring harness to the headliner.

. Install the interior lamp.
  Secure with the clip.
  Connect the electrical connector.
  Repeat the above procedure for the other side.

. With assistance, carefully install the headliner.
  Secure with the clips.

. Connect the headliner wiring harness rear electrical connector.

. Install the rear headliner trim panel.
  Secure the clips.

. Reposition the rear seats.

. Reposition the front seats.

. Install the passenger assist handles.
  Install the screws.
  Secure the screw covers.

. Install the sun visors.
  Install the clips.
  Install the screws.
  Install the screw covers.
  Connect the electrical connectors.

. Connect the RH A-pillar electrical connector.

. Install the rear overhead console.
  Connect the electrical connectors.
  Carefully secure the clips.

. Install the front overhead console.
  Connect the electrical connectors.
  Carefully secure the clips.

. Install both D-pillar upper trim panels.

. Install both C-pillar upper trim panels.

. Install both B-pillar upper trim panels.

. Install both A-pillar upper trim panels.